Products

Home / Products / EOL Products / Others / Gigabit POE Switch

High-res Photo

Gigabit POE Switch

Model：PS3069AF

EOL

Back

Features

Rugged Industrial 6 port Gigabit POE Switch
Designed with hardened Marvell IC and hardened POE controller
4x10/100/1000M TX 30W PSE (802.3af/at POE+) + 2 100/1000M SFP
Support power 1, power 2, and power din (for external power adapter)
Input Voltage: 48-56VDC, Operating temp: -40°C to +75°C

Discontinued date

2020.11.27

Alternative models

Indoor type 8port PS3089 / Vehile type M12 PS3064DM

Description

This industrial high power POE+ is designed for 48-56VDC input sources, especially for IP surveillance, traffic monitoring and for a broad range of applications. It accepts 3 power input source, from PW1, PW2, and Power DIN (or external power adapter). It can be used as a stand-alone device for buses, trucks, and other vehicles for Surveillance purposes. And it also can be used to cascaded/daisy-chain to other devices to cover wider area through the SFP connection.

Specifications

PS3069AF

Model	PS3069AF
Protocols	CSMA/CD
IEEE Standard	IEEE 802.3 10Base-T Ethernet / IEEE 802.3u 100Base-TX Fast Ethernet
IEEE Standard	IEEE 802.3ab 1000Base-T Gigabit Ethernet / IEEE 802.3z 1000Base-X Gigabit Ethernet
IEEE Standard	IEEE802.3x Flow Control and Back Pressure
IEEE Standard	IEEE802.3af for POE / IEEE802.3at for POE+
MAC address table size	1K
Network connector	4xRJ-45 10/100/1000BaseT(X) auto negotiation / 4 Giga POE+ 802.3at/af PSE port
Network connector	Auto MDI/MDI-X function, Full/Half duplex / 2 x SFP 100/1000M BaseX
Housing design	Rugged Metal, IP30 Protection
Power Consumption	5.76W@48 VDC full load, Without POE
Network Cable	UTP/STP above Cat.5e Cable。EIA/TIA-568 10-ohm (100m)
Network Cable	Fiber Cable (Multi-mode):50/125um,62.5/125um / Fiber Cable (Single-mode): 9/125um
Switch Architecture	Back-plane (Switching Fabric): 12Gbps
Packet Buffer Size	1M
Data Processing	Store and Forward
LEDs	PW1(Power 1) Green, PW2(Power 2) Green, PW3(Power 3) Amber for Power DIN RLY( Alarm Relay) Amber,
LEDs	TX/RJ-45 port: LNK (Link/Active) Green, POE (Amber)
LEDs	SFP Fiber Per port: Link (Green), Active Flash
POE power	POE power per port 30watts. Maximum 36Watts
POE power	Maximum total power 126Watts
POE power	Supports IEEE802.3af/at
Reserve polarity protection & Overload current protection	Present
Removable terminal block	Provide 2 Redundant power, Alarm relay contact, 6 Pin. And circular POWER DIN for power
Removable terminal block	adapter. Wire range: 0.34mm^2 to 2.5mm^2
Removable terminal block	Solid wire (AWG):12-24/14-22
Removable terminal block	Stranded wire(AWG): 12-24/14-22
Removable terminal block	Torque:5lb-In/0.5Nm/0.56Nm
Removable terminal block	Wire Strip length: 7-8mm
MTBF (mean time between failure)	460,304 hrs ( MIL-HDBK-217F) at 25°C
EN55022/24 (Certifications)	ITE equipmen
EN55011 (Certifications)	Industrial, Scientific and Medical (ISM) equipment
Safety (Certifications)	IEC EN60950-1
EMC/EMS (Certifications)	CE, FCC, VCCI
(Certifications) EMI	FCC Part 15 Subpart B Class A, CE EN 55022 Class A
EN 50155 / EN 60068-2-6 (Certifications)	Vibration
EN 50155 /EN 60068-2-27 (Certifications)	Shock
EN 50155 / EN 60068-2-32 (Certifications)	Free Fall
Alarm Relay Contact	Relay outputs with current carrying capacity of 1 A @24VDC,
Alarm Relay Contact	Relay in “open” circuit mode when PW1 and PW2 are connected. in “short” circuit mode when only one power supply is connected
Installation	DIN Rail mounting and Wall Mounting
Flow Control	IEEE 802.3x Flow Control and Back Pressure
Jumbo Frame	9KB
DIP switch	DIP 1：OFF：RSVD / ON：RSVD
DIP switch	DIP 2: OFF: SFP 1000M (DEFAULT); ON: SFP 100M
Operating humidity	5% to 95% (Non-condensing)
Operating temperature	-40℃〜75℃ fully tested
Storage temperature	-40℃〜85℃
Dimensions	142mmx43mmx105mm
Power Supply	Redundant Dual DC 48V-56V Power Input。POE input 48-56VDC