Products

Home / Products / EOL Products / Others / 100M POE SWITCH

High-res Photo

100M POE SWITCH

Model：PS3105T

EOL

Back

Features

Industrial 10 port POE Switch
Designed with hardened Marvell IC and hardened POE controller
With 8x10/100M 30W PSE + 2x 1000M TX
Support Power 1, Power 2, and Power DIN (For external power adapter)
Input 44-56VDC
Operating temp -40°C to 75°C

Discontinued date

2020.11.27

Alternative models

Indoor type 8port PS3089 / Vehile type M12 PS3064DM

Description

This Industrial POE switch is designed with Hardened Marvell IC and Hardened POE controller to ensure performance in harsh environment. It is equipped with 8 ports 30Watts 100M PSE and 2 x Giga TX to expand your network distance. With our ColdDesign technology, it will not only power up your PD and also reduce its excessive heat to a minimum. It has been rigorously tested for your Security, Surveillance, and transportation applications.

Specifications

PS3105T

Model	PS3105T
Protocols	CSMA/CD
IEEE Standard	IEEE 802.3 10Base-T Ethernet
IEEE Standard	IEEE 802.3u 100Base-TX Fast Ethernet
IEEE Standard	IEEE 802.3ab 1000Base-TX Gigabit Ethernet
IEEE Standard	IEEE802.3x Flow Control and Back Pressure
IEEE Standard	IEEE802.3af for POE。IEEE802.3at for POE+
MAC address table size	8K
Network connector	8xRJ-45 10/100BaseT(X) auto negotiation
Network connector	2xRJ-45 10/100/1000BaseT(X) auto negotiation
Network connector	8 10/100M POE+ 802.3at/af PSE port
Network connector	Auto MDI/MDI-X function, Full/Half duplex
Housing design	Rugged Metal, IP30 Protection
Power Consumption	5.76W@48 VDC full load, Without POE
Network Cable	UTP/STP above Cat.5e Cable
Network Cable	EIA/TIA-568 10-ohm (100m)
Switch Architecture	Back-plane (Switching Fabric): 5.6Gbps
Packet Buffer Size	1M
Data Processing	Store and Forward
LEDs	PW1(Power 1) Green, PW2(Power 2) Green, PW3(Power 3) Amber for External Power adapter, RLY (Relay) Amber
LEDs	TX/RJ-45 port: Green - LNK (Link/Active), Amber - 100M, Giga TX port, Green/Link, Flash/active
LEDs	POE, Green POE detected
POE power	Input Voltage 44VDC-56VDC
POE power	POE power per port 30watts. Maximum 36Watts with 56VDC input
POE power	Maximum total power 200Watts with 56VDC input
Reserve polarity protection & Overload current protection	Present
Removable terminal block	Provide 2 Redundant powers , Alarm relay contact ,6 Pin for PW1 and PW2 ( PW3 is an independent Power din connection for external power adapter)
Removable terminal block	Wire range: 0.34mm^2 to 2.5mm^2
Removable terminal block	Solid wire (AWG):12-24/14-22
Removable terminal block	Stranded wire(AWG): 12-24/14-22
Removable terminal block	Torque:5lb-In/0.5Nm/0.56Nm
Removable terminal block	Wire Strip length: 7-8mm
MTBF (mean time between failure)	490,304 hrs ( MIL-HDBK-217F) at 25°C
EN55022/24 (Certifications)	ITE equipment
EN55011 (Certifications)	Industrial, Scientific and Medical (ISM) equipment
Safety (Certifications)	IEC EN60950-1
EMC/EMS (Certifications)	CE, FCC, VCCI
(Certifications) EMI	FCC Part 15 Subpart B Class A, CE EN 55022 Class A
EN 50155 / EN 60068-2-6 (Certifications)	Vibration
EN 50155 /EN 60068-2-27 (Certifications)	Shock
EN 50155 / EN 60068-2-32 (Certifications)	Free Fall
Alarm Relay Contact	Relay outputs with current carrying capacity of 1 A @24VDC, for PW1 and PW2
Alarm Relay Contact	Relay in open circuit mode when 2 powers are connected. In short circuit mode when only one power supply is connected
Installation	DIN Rail mounting and Wall Mounting
Operating humidity	5% to 95% (Non-condensing)
Operating temperature	-40℃〜75℃ fully tested
Storage temperature	-40℃〜85℃
Dimensions	142mmx47.3mmx135.3mm
Power Supply	PW1 and PW2 for Redundant Dual DC 48V-56V 。PW3 for Power DIN to connect external power adapter DC 48-56V。For Switch only --- Power input range DC 12-56VDC。For POE --- Power input range 44-56VDC

Downloads

Classification	Description	Date	File Size	Downloads
Catalogue	Catalogue-PS3105T	2023-07-12	423KB
Image	High-Resolution Image	2023-05-30	830KB
Manual	PS3105C_PS3105T User Manual	2023-05-30	1,158KB