Model Name |
Displays the factory defined model name for identification purpose. |
S/N |
The switch serial number. |
FW Version |
The version of the firmware. |
Management |
Enable or disable management function when the switch is unmanaged+. |
MAC Address |
The switch’s MAC address. |
Device Name |
An administratively assigned name for this managed node. By convention, this is the node's fully-qualified domain name. A domain name is a text string drawn from the alphabet (A-Za-z), digits (0-9), minus sign (-). No space characters are permitted as part of a name. The first character must be an alpha character. And the first or last character must not be a minus sign. The allowed string length is 0 to 128. |
DHCP Client |
Click this checkbox will enable or disable DHCP. DHCP Server is used to allocate network addresses and deliver configuration parameters to dynamically configured hosts called DHCP client. |
IP Address |
The IPv4 address of the interface in dotted decimal notation. |
Subnet Mask |
The switch’s subnet mask. |
Default Gateway |
The switch’s default gateway. |
DNS Server |
Click check box and change device enable/disable DNS. DNS enable will show device DNS server address and can be changed it. DNS disable will return default for the DNS server address and can’t be changed it. Default is 0.0.0.0. |
NTP Server |
Click check box and change device enable/disable NTP. NTP enable will show device NTP server address and can be changed it. NTP disable will clear the NTP server address and can’t be changed it. |
Time Zone |
Time Zone is an offset time off GMT. You have to select the time zone first and then perform time sync via NTP because the switch will combine this time zone offset and updated NTP time to come out the local time, otherwise, you will not able to get the correct time. The switch supports configurable time zone from –12 to +13 step 1 hour. Default Time zone: +0 Hrs. Lists various Time Zones worldwide. Select appropriate Time Zone from the drop down and click Apply to set. |
Change Password |
Click check box and change password. |
New Password |
To type the password. The allowed string length is 0 to 255, and the allowed content is the ASCII characters from 32 to 126. |
Re-type New Password |
To type the password again. You must type the same password again in the field. |
Link-Local IP |
Displays the Switch Link-Local IP address. |