Products

Home / Products / Network Appliance / Industrial Media Converter / Gigabit Media Converter

High-res Photo

Gigabit Media Converter

Model：MC0012AF

Launched

Back

Features

Industrial Hardened Gigabit Media converter
Designed with hardened Marvell IC
1x10/100/1000M TX + 100/1000M SFP
48-56VDC, Operating temp: -40°C to +75°C

Description

This Rugged Industrial Gigabit Media converter is designed with hardened Marvell IC , It can tolerate extreme temperature in a harsh environment. Our ColdDesign technology will not only extent network distance, also reduce the excessive heat problem to a minimum. It accepts the input voltage from 12VDC to 56VDC. It is being rigorously tested for your Security, Transportation and Telco application.

Specifications

MC0012AF

Model	MC0012AF
Protocols	CSMA/CD
IEEE Standard	IEEE 802.3 10Base-T Ethernet / IEEE 802.3z 1000Base-X Gigabit Ethernet
IEEE Standard	IEEE 802.3u 100Base-TX Fast Ethernet
IEEE Standard	IEEE 802.3ab 1000Base-T Gigabit Ethernet
IEEE Standard	IEEE802.3x Flow Control and Back Pressure,
MAC address table size	2K
Network connector	1xRJ-45 10/100/1000BaseT(X) auto negotiation
Network connector	Auto MDI/MDI-X function
Network connector	Full/Half duplex
Network connector	1x SFP 100/1000M BaseX
Housing design	Rugged Metal ,IP30 Protection
Power Consumption	2 W@48 VDC
Network Cable	UTP/STP above Cat.5e Cable / EIA/TIA-568 10-ohm (100m)
Switch Architecture	Back-plane (Switching Fabric): 4Gbps
Packet Buffer Size	1 Mbits
Data Processing	Store and Forward
LEDs	PW1(power 1) Green: ON- power good, OFF-power failed
LEDs	UTP LED: Green ON – Link/active
LEDs	SFP LED: Green ON – SFP detected
Reserve polarity protection & Overload current protection	Present
Removable terminal block	Provide 4 pin terminal block / Wire range: 0.34mm^2 to 2.5mm^2 / Solid wire (AWG):12-24/14-22 / Stranded wire(AWG): 12-24/14-22 / Torque:5lb-In/0.5Nm/0.56Nm / Wire Strip length: 7-8mm
MTBF (mean time between failure)	510,304 hrs ( MIL-HDBK-217F) at 25°C
EN55022/24 (Certifications)	ITE equipment
EN55011 (Certifications)	Industrial, Scientific and Medical (ISM) equipment
Safety (Certifications)	IEC EN60950-1
EMC/EMS (Certifications)	CE、FCC、VCCI
(Certifications) EMI	FCC Part 15 Subpart B Class A, CE EN 55022 Class A
EN 50155 / EN 60068-2-6 (Certifications)	Vibration
EN 50155 /EN 60068-2-27 (Certifications)	Shock
EN 50155 / EN 60068-2-32 (Certifications)	Free Fall
Alarm Relay Contact	Relay outputs with current carrying capacity of 1 A @24VDC, Relay in short circuit mode when power fails. in open circuit mode when power supply is connected
Installation	DIN Rail mounting and Wall Mounting
Flow Control	IEEE 802.3x Flow Control and Back Pressure
Jumbo Frame	9KB
DIP switch	To select SFP speed 100M or 1000M
Operating humidity	5% to 95% (Non-condensing)
Operating temperature	-40℃〜75℃ fully tested
Storage temperature	-40℃〜85℃
Dimensions	103.5mm x 32mm x 81.5mm
Power Supply	4 pin terminal block with 12V-56V VDC Power Input, SW ( Relay ): Relay switch for alarm